产品型号：FPC1.5-XX-350/381-00
认证(APPROVAL):CE CQC UL
测试标准(Test standard):IEC/EN61984：2009 / UL1059
产品间距(Pitch):3.5/3.81mm
极数(Poles):02-24P
额定电压(Rated voltage):250V
额定电流(Rated current):7A
额定连接容量(Rated connection capacity)(solid/stranded):1.5mm2
额定冲击电压(Rated impulse voltage):2.5KV
额定扭矩(Rated torque):0.2N·m
UL1059测试数据（UL1059Test data):UL File Number E509821
额定电压(Rated voltage):300V
额定电流(Rated current):8A
额定连接容量(Rated connection capacity) (solid/stranded):28-16AWG
额定扭矩（Rated torque）:1.77Lb. in
通用数据(General data) /
螺丝(Screw):M2
阻燃等级(Inflammability class):UL94 V-0
环境温度(Ambient temperature):-40~+105℃
相对湿度(Relative humidity):5%-95%
抽样检验标准(Inspection standard）:MIL-STD-105E II
允收水准(AQL):0.65
保质期(Warranty):12 months
材质和电镀(Material and plating) /
绝缘材质(Housing):PA66
螺丝(Screws):Steel，Zn plated钢,镀锌
触点材料(Contact):Copper alloy，Sn plated铜合金，镀锡
方盒(Cage):Copper alloy，Ni plated铜合金，镀镍
澳斯插拔式接线端子在设计上结合了维护简便和可插拔两大优点，款式多且可进行各种不同
组合，可以连接多种类型的导线，间距分位3.5mm 3.81mm 3.96mm 5.0mm 5.08mm 7.5mm
7.62mm可供选择，适用于工业电子设备，电力，设备等。
接线方法 (Wire connecting)
推荐剥线长度6-7mm; Recommended stripping length 6-7mm;
1.）单股硬导线，剥好对应长度的导线后，用额定的扭力拧紧；
For solid wire, stripping wire to the appointed length, then tightening with rated torque.
2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端头，用额定的扭力拧紧；
For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque.
注意事项：扭力要平稳，不能使用爆发力；( Tightening process should be steady, can’t use explosive force.)
