安科瑞高压柜抽屉柜表带式无线测温ATE200

ATE200 structure introduction:
1 —— 无线温度传感器主体，测温探头在背面 The core of wireless temperature sensor ATE200,
temperature measuring probe is on the other side
2 —— 表带及锁扣 strap and hasp
3 —— 电池开关 battery switch

将传感器主体固定在安装位置，将表带绕过安装母排或者触头穿过表带，表收紧，后将
表带尾用锁扣锁紧。表带过长可以剪掉多余部分，表带过短可以联系我司增订。安装前打开电池开
关，电源指示灯闪烁两次。安装实例见下图：

Fixing the body of sensor on the position, then strapping it on the bus bar or breaker contact and
frapping it through the hole on the strap, fixing the strap by hasp. Clipping the strap if it is too long when
finished, if it is too short, contacting us for strap parts before installation. Open the battery switch before
installation, the power indicator flashes twice.The installation examples see images below.