YJX-ZE制杯机打杯机堆叠机器人手臂机械手

JYJX-ZE制杯机二轴机械手
YJX-ZE Cup Making Machine Two Axis Manipulator
一、技术参数 Technical Parameters：
1、抓取堆叠次数（视制杯机成型状况）：16～26 次/分钟
Grab stack speed (According to the forming condition of cup making machine): 16～26 Time/Min
2、使用气源 Air pressure：0.8Mpa
3、使用电源 Power supply：220V/2P
4、使用优势：自动抓取、自动堆叠、自动计数。抓取和计数后输送带自动输送。
Advantage: Automatic grabbing, stacking and counting. Automatic transport by conveyer belt after counting.
二、主要配置 Main Configuration:
1、机架采用型钢、型材制造。Machine frame adopts profile steel and profile material.
2、进退采用三菱0.75KW伺服驱动器控制三菱伺服电机进退，位置准确。
0.75KW MITSUBISHI servo motor and servopack control the suckers forward and backward
3、上下堆叠采用三菱1KW伺服驱动器控制三菱伺服电机进退，计数堆叠准确。
1KW MITSUBISHI servo motor and servopack control the suckers up and down, counting and stacking accurately.
4、进退以及上下导轨采用上银导轨。
Forward & backward rail and up & down rail adopt Taiwan HIWIN brand
5、进退以及上下控制采用伺服电机控制同步带，满足了抓取以及堆叠的速度和精度。
Servo motors control the synchronous belt to make the suckers forward & backward and up & down, which greatly satisfies the speed and accuracy of the grasping and stacking.
6、吸盘采用SMC吸盘，材质为硅胶材质，更好保护了模具的安全。
The sucker is SMC brand, silicone gel material, it is safe for the mould.
7、输送机采用0.40Kw电机，步进计数输送
0.40Kw stepping motor control the conveyor belt together with counting
8、机械手外观尺寸 Manipulator dimension: L130xW60xH200 cm
输送带外观尺寸 Conveyer belt dimension: L300xW80xH150 cm
整机重量 Total weight: ≈ 500 Kg
三、电器主要配置 Main Electric Configuration：
1、进退伺服控制器：三菱0.75KW伺服控制器0.75KW伺服电机
0.75KW MITSUBISHI servo motor and servopack control the suckers forward and backward
2、上下堆叠伺服控制器：三菱1KW伺服控制器1KW伺服电机
1KW MITSUBISHI servo motor and servopack control the suckers up and down
3、人机界面：运动控制。HMI: Control operation
4、与制杯机信号连接线：通讯线
Line of Manipulator connecting Cup making machine: Communication line
5、吸取制品控制：SMC真空发生器 Sucker control: SMC Vacuum generator
6、输送控制：1.5KW变频器 Conveyer control: 1.5KW frequency converter
7、信号、接近开关：欧姆龙 Signal and Proximity switch: Omron
8、开关、接线端子：施耐德 Switch, Connection terminal: Schneider
四、机器保养注意事项 Machine Maintenance：
1、请勿溅水、油、粉尘等; Please don’t splash water, oil, dust, etc., to the machine
2、避免接触易燃易爆及腐蚀性气体、液体;
Avoid to contact with inflammable, explosive, corrosive gas or liquid.
3、远离电器噪声源（等离子）。Keep away from electric appliance noise sourse (Plasma)</a>