三亚厚膜汉高ABLESTIKJM7000导电胶

LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.

TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1º @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350ºC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300ºC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370ºC.

Ablestik 84-1LMISR4是一种单组份、低粘度的导电银胶。胶流变性能好，适用于高速die attach封装，无拉丝和拖尾；纯度高，广泛应用在半导体工业主要用于半导体芯片的粘贴，适用于全自动机器高速点胶，是目前世界上出胶速度 快的一款导电银胶。特点 流变性能好，适用于高速die attach封装，无拉丝和拖尾；纯度高，广泛应用在半导体工业.

84-1 LMISR4导电银胶适用于全自动机器高速点胶。Ablebond 84-1 LMISR4导电银胶允许 少量胶分配，并降低停留时间，而无残胶或拉丝的烦恼。

包装规格：5cc 10cc



ABLESTIK 84-1A，84-1LMIT1,84-3等

ABLESTIK 5020 506胶膜

深圳汉高导电胶 西安汉高导电胶 沈阳汉高代理 山东汉高代理 西安导电胶 山东导电胶 广州导电胶 导电胶