供应BLD布莱迪压力表YTHN-63.AO耐震0-1mpa现货M141.5洗车机设备
-
面议
简介:
此类(外卡锁式罩壳、两件式)压力表采用特的不锈钢外壳及测压部件的两件式设计,分为径向、下轴
向和下轴向、U型卡子三种安装款式。外壳罩圈具有锁紧及加铅封的功能。表壳顶部设有充液塞,可在现场向表
内充液。仪表根据是否充液的选择,可分为YTH及YTHN型。YTH型为不锈钢防腐压力表“干式”;YTHN型为
不锈钢耐震压力表“充液型”,通过向表内充液可有效降低表针在工作中的振颤,同时,还可延长仪表内机部件
的使用寿命。
Brief Introduction
The pressure gauge is designed of special Stainless Steel case and two-piece type for pressure element.
The mounting types are Bottom mounting, Lower back mounting and Lower back U clamp mounting. The ring
can be locked and lead seal. You could fill liquid on field through the top liquid filling hole. It can be separated
to be YTH, YTHN according to whether liquid filling. The YTH is Stainless Steel Corrosion-proof pressure gauge
“dry type”; YTHN is Stainless Steel Vibration-proof pressure gauge (Liquid filling type) whose liquid inside would
reduce the vibration of the pointer and extend the using life.
主要技术参数
执行标准 GB/T1226-2001
公称直径 127mm
精度等级 1.5%;(1% 可选)
测量范围 400Psi; 1500Psi; 2000Psi; 及低0.1MPa
至高 60MPa 全量程
防护等级 IP65
正常工作环境温度 -5℃~+60℃
连接螺纹 标准 Z12( NPT1/2)
其它 NPT1/4 \G1/2\ M20 (M20X1.5)可选
仪表结构 径向SUS304 抛光外卡式表壳;表壳与接
头间加过渡套,过渡套与表壳激光焊接,与
接头氩弧焊接
仪表接头 SUS304;
波登管 SUS316 与仪表接头氩弧焊接
密封件 PDM
仪表充液 YTHN充填甘油; YTH干式可选
仪表机芯 不锈钢
仪表玻璃 仪表平板玻璃(有机玻璃、安全双层玻
璃可选)
密封件 硅橡胶
MODEL 外卡式压力表
Specifications
Standard execntive: GB/T1226-2001
Diameter: 127mm
Accuracy: 1.5% (1% available)
Ranges: 400Psi; 1500Psi; 2000Psi; Min 0.1Mpa to
Max 60Mpa of full scale value
Degree of protection: IP65
Ambient temperature: -5℃~+60℃
Connection: Z12( NPT1/2) ,
NPT1/4 \G1/2\ M20 (M20X1.5)
Mounting: Bottom mounting, SUS304 Polishing
Outside bayonet case, tube between case and
socket, laser welding to case and Argon-arc
welding to socket
Socket:SUS304
Bourdon tube: SUS316 Argon-arc welding to socket
Seal: PDM
Liquid filling: YTHN Glycerin.
YTH Dry case available
Internals: Stainless Steel
Window: Instrument plain glass (Organic glass,
Laminated safety glass available)
Seal: Silicone rubber