提供山东浦锐 豆干烟熏炉 烟熏豆腐干机器操作流程
1. The pressure of the well cut into pieces of dried beancurd in smoky barrow tray, we provide general smoked cart and according to the model output can be placed above 6 to 18 layers of stainless steel plates, each layer plate/sieve all filled up with dried beancurd. Note: each cm like to leave a gap directly.
2. Push carts laden with bean curd cake to smoke inside the furnace. Shut the door, or via a button on the left side of the bean curd smoked furnace control PLC computer control panel, set temperature and time, can heat up, skin drying after playing a little smoke development switch, smoke can inside the smoked furnace smoked bean curd cake. Automatic alarm, after smoke time to close smoke switch, switch on smoke, smoke exhaust to the outside, open the smoked furnace, can see smoked bean curd cake.
1.将压好裁成块的豆腐干放在我们提供的烟熏推车托盘上，一般烟熏推车根据型号和产量上面可放置6-18层不锈钢盘子，将每层的盘子/筛子全部摆满豆腐干。注意：每块直接要留一公分的间隙。
2.将放满豆腐干的推车推到烟熏炉里面。关上炉门，通过豆干烟熏炉左侧控制按钮或者PLC电脑控制面板，设定温度和时间，即可升温，表皮稍微烘干后打开发烟开关，烟雾即可在烟熏炉炉体内部烟熏豆腐干。烟熏时间到后自动报警，关闭发烟开关，打开排烟开关，将烟雾排到室外后，打开烟熏炉，即可看到烟熏完成的豆腐干。
上色均匀
烟熏质量取决于先前的干燥过程。在烟熏炉顶部，涡轮风扇大功率低音运转，且为模式设计。经过一段升温过程，系统配置的气流调节装置均匀地分配风到任意炉内的各个角落，所以短时间内可实现均匀干燥并且在烟熏过程中使得上色均匀。
后一步干燥
干燥是***重要的工艺过程，直接决定接下来的工艺结果。如果发现烟熏效果异常，我们就建议您先检查干燥过程是否正确。不完全干燥直接导致烟熏效果不佳。干燥质量与温度的上升和风的流动是否平衡有很大的关系。豆干烟熏炉提供强风循环和热能均匀分配系统，使整个炉内充满干燥气流，缩短加工时间，带来高出品率.