智能桥架生产设备,新型桥架生产成型机厂家

智能桥架生产设备,新型桥架生产成型机厂家，山东炜桦智能大跨距电缆桥架

Shandong Weihua Intelligent Long-Span Cable Bridge Frame

当前大跨距电缆桥架一般是由拉挤玻璃钢型材组装而成，适用于电力电缆、控制电缆、照明电缆及配件等。与铁制桥架相比，具有使用寿命长(一般设计寿命为二十年)、安装方便且成本低(比重仅为碳钢的1/4，施工中无需动火，单根桥架长度可达8米，甚至更长)、切割方便、不需维护等性。

At present, the long-span cable bridge is generally assembled by extruded FRP profiles, which is suitable for power cables, control cables, lighting cables and accessories. Compared with the iron bridge, it has the advantages of long service life (generally designed for 20 years), convenient installation and low cost (the specific gravity is only 1/4 of carbon steel, no fire is needed in construction, the length of a single bridge can reach 8 meters, or even longer), convenient cutting and no maintenance.

炜桦冷弯槽式电缆桥架是一种全封闭型电缆桥架。它适用于敷设计算机电缆、通信电缆、热电偶电缆及其他高灵敏系统的控制电缆等。它对控制电缆重腐蚀中环境电缆的防护都有较好的效果。梯级式、托盘式、槽式电缆桥架各自优缺点:梯级式汇线桥架具有良好的通风性能，不防尘、不防干扰。槽式、托盘式汇线桥架具有防尘、防干扰性能。

The birch cold-formed trough cable bridge is a fully enclosed cable bridge. It is most suitable for laying computer cables, communication cables, thermocouple cables and other high sensitive control cables. It has good effect on shielding interference of control cables and protection of environmental cables in heavy corrosion. The advantages and disadvantages of cascade, tray and trough cable bridges are as follows: cascade cable bridges have good ventilation performance, no dust and no interference. The trough type and tray type bridge has the performance of dust and interference prevention.

炜桦冷弯桥架生产设备一种节材、节能、?的金属成形新工艺、新技术。冷弯成形是通过顺序配置的多道次成形轧辊,把卷材、带材等金属板带不断地进行横向弯曲,以制成特定断面的型材。在辊式冷弯成型过程中只有弯曲变形。除坯料弯曲角局部有轻微减薄外,变形材料的厚度在成型过程中保持不变。这种加工方法特别适合于外形纵长、批量较大的产品的加工。

The birch cold bending bridge production equipment is a new metal forming process and new technology with material saving, energy saving and high efficiency. Cold bending is a kind of multi-pass forming roll, which is arranged sequentially. The rolls and strips are continuously bended horizontally to make profiles with specific sections. In the process of roll cold bending, only bending deformation occurs. The thickness of the deformed material remains unchanged during the forming process except that the bending angle of the billet is slightly thinned locally. This processing method is especially suitable for the processing of high precision products with long profile and large batches.

设备主要参数

Main parameters of equipment



传动模式：齿轮传动加链条

Transmission mode: gear transmission plus chain

材料规格：低炭钢、镀锌带钢卷

Material Specification: Low Carbon Steel, Galvanized Strip Coil

切断方式：液压切断

Cut-off mode: hydraulic cut-off

电压参数：380V/415V，50Hz, 3相

Voltage parameters: 380V/415V, 50Hz, 3-phase

电气控制：PLC

Electrical control: PLC

驱动电机：变频电机驱动

Driving motor: variable frequency motor drive

钢带厚度：1--2.3mm

Strip thickness: 1-2.3mm

钢带宽度：200-1000mm

Width of steel band: 200-1000MM

轧辊材质：Cr12 淬火HRC56°-60°

Roll Material: Cr12 Quenched HRC56 Degree-60 Degree

液压油型号：46#液压油

Hydraulic Oil Type: 46 # Hydraulic Oil

齿轮油型号：18#齿轮油

Gear Oil Type: 18 # Gear Oil

总电机功率：40kw

Total motor power: 40 kw

液压系统功率：15kw

Hydraulic system power: 15 KW

大承重钢带：5吨

Maximum load-bearing steel strip: 5 tons

切断尺寸公差：≤ ±0.5mm（长≤3000mm）

Cut-off dimension tolerance: <0.5mm (length <3000mm)

切断模具材质： Cr12MoV

Cutting Die Material: Cr12MoV