CuZn37Pb2德标铅黄铜板环保铜

CuZn37Pb2 ( CW606N )
Grade : CuZn37Pb2
Number: CW606N
Classification: Cupper alloy
Density 8.4 g/cm ³
Standard: EN 1652: 1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes
EN 12164: 1998 Copper and copper alloys. Rod for free machining purposes
EN 12166: 1998 Copper and copper alloys. Wire for general purposes
EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes
EN 12168: 1998 Copper and copper alloys. Hollow rod for free machining purposes
Equivalent grades: No information



Chemical composition % of grade CuZn37Pb2 ( CW606N )
Fe Ni Al Cu Pb Sn Others -
max 0.2 max 0.3 max 0.05 61 - 62 1.6 - 2.5 max 0.2 total 0.2 Zn - remainder


Mechanical properties of grade CuZn37Pb2 ( CW606N )

Rm - Tensile strength (MPa) (R290) 290-370
Rm - Tensile strength (MPa) (R370) 370-440
Rm - Tensile strength (MPa) (R440) 440-540


Rp0.2 0.2% proof strength (MPa) (R290) 200
Rp0.2 0.2% proof strength (MPa) (R370) 200
Rp0.2 0.2% proof strength (MPa) (R440) 370


A - Min. elongation at fracture (%) (R290) 50
A - Min. elongation at fracture (%) (R370) 28
A - Min. elongation at fracture (%) (R440) 12


A - Min. elongation Lo = 50mm (%) (R290) 40
A - Min. elongation Lo = 50mm (%) (R370) 19
A - Min. elongation Lo = 50mm (%) (R440) 5


Vickers hardness ( HV): (H060) 60 - 110
Vickers hardness ( HV): (H110) 110 - 140
Vickers hardness ( HV): (H140) 140 - 170