电缆槽盖板模具

电缆槽盖板模具

 电缆槽盖板模具按形态分:电缆槽单槽盖板模具,电缆槽双槽盖板模具,按型号Ⅰ型、Ⅱ型、Ⅲ型,本产品具有组模、拆模方便,模具组装后稳定,不漏浆,生产的电缆槽尺寸稳定、质量好等优点,并且废品可重新加工而不发生化学变化,具有可熔、可溶的特点。
        技术要求:
        (1)槽体构件尺寸在满足使用功能的同时高和宽相对减小,减少工程的土石方挖掘量、节省工时、加快工程进度。
        (2)槽与槽之间连接缝隙很小,连接的过程中不需要抹灰,有泄水作用。   
        (3)构件采用高频振动、高压压制而成,具有密实度高、韧性好的特点;电缆槽可打泻水孔;侧壁可打孔有利于接线盒的固定安装。
        (4)电缆槽边角的R型设计,内部采用钢纤维为加强筋,分散性好、对混凝土的裹附力加强,这些都可有效避免构件掉边掉角。
        (5)电缆槽在整个工程中采用同一模具制作,了构件尺寸的规整统一性,使工程得到保障。

电缆槽盖板模具    沟盖板模具   电缆槽盖板模具规格

Cable tray cover mold

The mould of cable trough cover plate can be divided into single trough cover plate mould of cable trough and double trough cover plate mould of cable trough according to the model I, II and III. this product has the advantages of convenient mold assembly and removal, stable after mold assembly, no leakage, stable size and good quality of cable trough produced, and the waste products can be reprocessed without chemical change, with the characteristics of fusibility and solubility.

Technical requirements:

(1) The size of the tank body component meets the use function, while the height and width are relatively reduced, reducing the excavation amount of earthwork, saving labor time and speeding up the project progress.

(2) The connection gap between the groove and the groove is very small, so there is no need for plastering in the connection process, which has the function of water discharge.

(3) The components are made of high-frequency vibration and high-pressure pressing, with the characteristics of high density and good toughness; the cable trough can be perforated with water drainage holes; the side wall can be perforated to facilitate the fixed installation of the junction box.

(4) The R-shape design of the cable trough corner, with steel fiber as the reinforcing bar, good dispersibility and strengthening the concrete binding force, can effectively avoid the edge falling and corner falling of the components.

(5) the first mock exam is adopted in the whole project to ensure the integrity and uniformity of the size of the components, and ensure that the quality works are ensured.