PTFE美国苏威L203铁氟龙粉状桶装

Algoflon® L203
聚四氟 (PTFE)
Solvay Specialty Polymers


数据表
PDF(中文)
PDF(英语)
UL 黄卡
购买地点

产品说明： 　


Algoflon® L203是一种聚四氟 (PTFE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,。

Algoflon® L203的典型应用领域为:添加剂/色母粒
总体
材料状态 已商用：当前有效

供货地区 北美洲
欧洲
亚太地区


用途 添加剂

外观 白色

形式 粉状

物理性能 额定值 单位制 测试方法
Bulk Density 325 g/l ASTM D3418
比表面积 > 7.5 m²/g 内部方法
平均颗粒尺寸 - 表面 5.0 µm 内部方法

热性能 额定值 单位制 测试方法
熔融峰值温度 325 到 335 °C ASTM D3418

补充信息
Processing
Algoflon® L203 is an ideal 添加剂 for lubricants with respect to any other solid 添加剂 because they offer:

Low coefficient of friction and reduced wear
Outstanding chemical and corrosion resistance
High temperature resistance
Good low temperature torque

Algoflon® L203 micronized powder is ideal for dispersing in oils, greases and pastes to improve both high and low temperature lubricity and is preferred over conventional 添加剂s, such as graphite or molybdenum disulfide whenever potential staining cannot be tolerated.

Greases incorporating up to 30% by weight of Algoflon® L203 micronized powder are effective for much longer periods than conventional greases so that lubrication frequency may be reduced substantially. Extreme environmental demands on greases, such as those experienced in the automotive industry(i.e. wide temperature ranges and heavy loads) can be accommodated by the addition of Algoflon® L micronized powders.

Storage and Handling

The usual precautions for safe storage and handling of Algoflon® L203 should be taken according to material safety documentation and experience. There will be no chemical deterioration of the Algoflon® L203 during proper storage.


Shelf life of Algoflon® L203 micronized powders will vary depending upon whether the recommended storage conditions are maintained and whether the material remains free from foreign contamination during storage time (not exposed to dirt, dust, water or other chemicals). The material should remain sealed in the original containers and storage conditions should provide for protection from temperature extremes as well as rain, snow or other wet environments (or such conditions which may damage the storage containers in which the product is stored).

Safety and Toxicology

Before using PTFE Algoflon® L micronized powders consult the product Material Safety Data Sheet and follow all label directions and handling precautions.


As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods.

Packaging

Algoflon® L203 is packaged in 20 kg non returnable drums. Each drum has one bag liner made of polyethylene resin.