惠州长宁自流地坪漆工程
-
¥15.00
的质量要求
建筑物的厂房地坪漆的质量要求:
1、地面外观表面平整,无裂纹、起皮、山粉、脱层等现象;
2、抗压强度大于30Mpa;
3、抗折强度大于25Mpa;
4、耐磨损性能符合GB/T1741-1993标准;
5、耐化学腐蚀性能符合GB/T1742-1993标准;
6、耐水性能符合GB/T1743-1993标准;
7、环氧自流平地面密封性能符合GB/T1744-1993标准;
8、防滑性能符合GB/T1128-1993标准;
9、紫外线阻挡性能符合GB/T1745-1993标准;
10、耐候性能符合GB/T1746-1993标准。
技术要求
一、工艺技术要求
1、电阻率检测:选择一块未经处理的地面,检测电阻率,如果电阻率不是10^6Ω以上,则应采取措施进行防静电处理;
2、处理深度:防静电地坪处理厚度为3-5mm;
3、涂料:采用环氧树脂防静电涂料,涂料应具有良好的耐腐蚀性、耐磨性、良好的附着力;
4、施工环境:施工环境温度应大于5℃,湿度应小于85%;
5、涂料涂刷:环氧树脂防静电涂料应按三层涂刷,层涂刷采用滚涂方式,每层涂刷厚度应大于0.2mm,涂刷间隔时间应小于6小时;
6、处理结果:施工完毕后,应对处理表面进行电阻率检测,电阻率应大于10^6Ω,符合防静电要求。
分析
Self-leveling floor is a kind of floor covering material, which is composed of cement, quartz sand, modified acrylic resin and other additives. It has the characteristics of wear resistance, high strength, good impermeability, easy cleaning and maintenance, long service life, etc. It can be applied to places such as shopping malls, hospitals, schools, factories, warehouses, etc.
自流平地坪是一种地面覆盖材料,由水泥、石英砂、改性丙烯酸树脂及其他添加剂组成,具有耐磨、高强度、良好的防水性、易清洁维护、使用寿命长等特点,可应用于购物中心、医院、学校、工厂、仓库等场所。
Self-leveling floor is a kind of high-end floor covering material. It has strong wear resistance, strong adhesion, strong compression and impact resistance, good waterproof performance and strong waterproof performance. In addition, it has excellent anti-fouling and anti-corrosion performance. It can be used in places with high humidity, such as bathrooms and kitchens, and it can also be used in places with large traffic flow, such as shopping malls, airports, and stations.
自流平地坪是一种地面覆盖材料,具有耐磨性强、粘结性强、抗压和抗冲击性强、防水性能好、防水性能强等特点。此外,还具有的防污和防腐蚀性能,可用于湿度较大的场所,如卫生间和厨房,也可用于客流量较大的场所,如购物中心、机场、车站等。
The self-leveling floor has the characteristics of good wear resistance, strong adhesion, strong compression and impact resistance, good waterproof performance, strong waterproof performance and good anti-fouling and anti-corrosion performance. In addition, it also has the advantages of simple construction, fast construction speed and low cost.
自流平地坪具有耐磨性强、粘结性强、抗压和抗冲击性强、防水性能好、防水性能强、防污和防腐蚀性能好等特点,此外,还具有施工简便、施工速度快、成本低等优点。