PBC合金钢壳IPPS20G直线滚珠轴承座

PBC合金钢壳 IPPS20G 直线滚珠轴承座
本产品可用于五金机械，家电设备，产线建设等相关行业

品 牌：PBC
型 号：IPPS20G(多款型号供选)

PBC合金钢壳 IPPS20G 直线滚珠轴承座 基本说明
许多人认为这是直线运动应用的默认选择，圆轴网状直线滚珠轴承座是经过试验和测试的选项，适用于大多数线性运动应用。 这是封闭的单长度英制（英制）版本。 闭式轴承设计允许通过使用端部支撑轴来降低成本。 这些枕块轴承常见于北美和英国。 它的尺寸可与其他制造商和PBC的Simplicity轴承互换。
Considered by many to be the default choice for linear motion applications, the round shaft reticulating linear ball bearing pillow block is a tried and tested option suitable for most linear motion applications. This is the closed, single length, imperial (inch) version. The closed bearing design allows for a lower cost installation by using end supported shafts. These pillow block bearings are most commonly found in North America and the UK. It is size interchangeable with other manufacturers and with PBC’s Simplicity bearings.

PBC合金钢壳 IPPS20G 直线滚珠轴承座 参数
ID大小范围从1/4
静态负载能力高达1700 lb（7900 N）
动态负载能力高达850 lb（3800 N）
尺寸可与行业标准和“简单”系列互换
低摩擦系数
热处理合金钢壳
树脂固定器可降低噪音
良好的温度范围：-4 / 176F（-20 / 80C）
双密封包括标准 - 无需额外费用！

ID sizes range from 1/4
Static Load Capacities up to 1700 lb (7900 N)
Dynamic Load Capacities up to 850 lb (3800 N)
Size Interchangeable with industry standards & with “Simplicity” series
Low Coefficient of Friction
Heat treated alloy steel shell
Resin retainer for reduced noise
Good temperature range: -4/ 176F (-20/ 80C)
Double Seals included standard – no additional cost!