桥架罗拉机设备，桥架自动成型设备厂家

桥架罗拉机设备，桥架自动成型设备厂家，山东炜桦冷弯科技：

Shandong Betula Cold Bending Technology:

电缆桥架分为槽式、托盘式和梯架式、网格式等结构,由支架、托臂和安装附件等组成。建筑物内桥架可以立架设, 也可以附设在各种建(构)筑物和管廊支架上,应体现结构简单,造型美观、配置灵活和维修方便等特点,全部零件均需进行镀锌处理,安装在建筑物外露天的桥架。

Cable bridge is divided into trough type, tray type, ladder type, grid type and other structures, which are composed of brackets, brackets and installation accessories. Bridges in buildings can be erected independently or attached to various buildings and pipe gallery brackets. They should embody the characteristics of simple structure, beautiful appearance, flexible configuration and convenient maintenance. All parts need galvanizing treatment and are installed on the bridge in the open air of buildings.

梯级式电缆桥架：CQ1-T型梯级式电缆桥架是根据国内外有关资料而改进设计的。它具有重量轻、成本低、造型别具、安装方便、散热、透气好等优点。他适用于一般直径较大电缆的敷设，适合于高、低压动力电缆的敷设。

Cascade Cable Bridge: CQ1-T cascade cable bridge is improved and designed according to the relevant information at home and abroad. It has the advantages of light weight, low cost, unique shape, convenient installation, heat dissipation and good ventilation. It is suitable for laying large diameter cables and high and low voltage power cables.

托盘式电缆桥架：托盘式电缆桥架是石油、化工、轻工、电讯等方面应用广泛的一种。它具有重量轻、载荷大、造型美观、结构简单、安装方便等优点。它即适用于动力电缆的安装，也适合于控制电缆的敷设。

Pallet cable bridge: Pallet cable bridge is one of the most widely used in petroleum, chemical industry, light industry, telecommunications, etc. It has the advantages of light weight, large load, beautiful shape, simple structure and convenient installation. It is suitable for installation of power cable and laying of control cable.

电缆桥架设备主要参数：

Main parameters of cable bridge equipment:



动力方式：PLC变频电机驱动

Power mode: PLC variable frequency motor drive

材料厚度：1.0--2.5mm

Material thickness: 1.0-2.5mm

轧制宽度：100mm-1000mm

Rolling width: 100mm-1000mm

轧辊材质：Cr12 淬火HRC58°-62°

Roll Material: Cr12 Quenched HRC58 Degree-62 Degree

液压油型号：48#液压油

Hydraulic Oil Type: 48 # Hydraulic Oil

齿轮油型号：18#齿轮油

Gear Oil Type: 18 # Gear Oil

总电机功率：44kw

Total motor power: 44 kw

液压系统功率：7.5kw

Hydraulic system power: 7.5 kw

大承重钢带：8吨

Maximum load-bearing steel strip: 8 tons

切断尺寸公差：≤ ±0.5mm（长≤3000mm）

Cut-off dimension tolerance: <0.5mm (length <3000mm)

冲压模具材质： Cr12MoV

Material of Stamping Die: Cr12MoV

轧制速度/时：10～15米/分钟

Rolling speed/hour: 10-15 m/min