青岛华耀温室VB-45移动苗床规格支持定制

青岛华耀温室VB-45移动苗床规格支持定制
移动苗床现在温室大棚蔬菜现已越来越广泛了，而我们对于移动苗床的需求量也越来越大，它的运用寿数直接联络到我们大棚的寿数，所以我们在质料的选择上一定要慎重。要根据自己温室大棚的面积，来确定我们所需求苗床的规模，在苗床规模的选择上，我们又的技术人员，来量身打造方案，可以充分的利用我们大棚里每一寸可利用的空间。通过计算把移动苗床的标准以及摆放方位，做出一个合理的安排。

另外要注意选择耐腐蚀，抗压，承重能力好的质料进行焊接，而且移动苗床的网片要选用焊接而成的。对于我们所用的移动苗床的定型网片，我们在选择的时候可以组织主动化移动苗床生产线，选择多头点焊机，多头点焊机可以处理我们在焊接中所遇到的大部分问题，它包含了钢筋的调直，网片主动电焊，以及切开不一样的网片等一些功能，这对于我们苗床网再联接的时候，提供了一个很大的便利。

养花移动苗床-育苗床的规格：
移动苗床标准高度0.7m,可以进行微调，标准宽1.7m,也可以根据温室宽度定制，长度可根据用户要求定做；苗床网一般采用钢丝焊接，再进行热浸镀锌处理，防腐性能高，承重能力好，寿命长；网格一般为130x25mm或130x30mm。

养花移动苗床-育苗床的特点：
1.手动驱动，操作简单，移动方便。苗床边框为铝合金材质，可向左、右移动，任意两个苗床之间可产生0.6m的作业通道，能使温室的使用面积达80%左右。
2.主体框架和苗床网都采用热镀锌工艺，能在潮汐环境下长期使用。
3.种植操作方便，设有限位防范设置，放置由于偏重引起的倾斜问题。
Mobile seedbed now greenhouse vegetables are more and more widely used, and our demand for mobile seedbed is also growing, its use of longevity directly related to our greenhouse longevity, so we must be careful in the selection of materials. First of all, we should determine the size of the seedbed we need according to the area of our greenhouse. On the selection of the size of the seedbed, we have professional technical personnel to tailor the scheme, which can make full use of every inch of available space in our greenhouse. By calculating the standard of moving seedbed and the placement position, make a reasonable arrangement.



In addition, attention should be paid to the selection of materials with good corrosion resistance, compression resistance and bearing capacity, and the mesh of moving seedbed should be welded. For the fixed mesh of mobile seedbed we use, we can organize the active mobile seedbed production line when selecting, and select multi head spot welding machine. The multi head spot welding machine can deal with most of the problems encountered in welding. It includes some functions such as steel bar straightening, mesh active electric welding, and cutting different mesh pieces. This can be used for our seedbed mesh re connection It provides a great convenience.



Moving seedbed for flower raising - Specifications of seedling bed:

The standard height of mobile seedbed is 0.7m, which can be fine tuned, the standard width is 1.7m, and can also be customized according to the width of greenhouse, and the length can be customized according to the user's requirements; generally, the seedbed net is welded with steel wire and then hot-dip galvanized, which has high corrosion resistance, good bearing capacity and long service life; the grid is generally 130x25mm or 130x30mm.



The characteristics of moving seedbed - seedling bed are as follows

1. Manual drive, easy to operate and easy to move. The frame of the seedbed is made of aluminum alloy, which can be moved to the left and right. A 0.6m working channel can be generated between any two seedbeds, which can make the use area of greenhouse reach about 80%.

2. The main frame and seedbed net are hot-dip galvanized, which can be used in tidal environment for a long time.

3. The planting operation is convenient, and there is a limit to prevent the device from tilting due to the overweight.