移动式水稳搅拌站搅拌站50型HZS100-3Y

优缺点

优点包括拆装快捷、移动方便、占地面积小、易于实施自动化、工作性能可靠、搅拌快速均匀等。然而，移动搅拌站也存在一些缺点，如生产能力受限、设备维护难度较大、生产过程会产生一定噪音和粉尘等。

以上是对移动式搅拌站的详细介绍，包括其特点、结构构成、应用领域和优缺点等方面。

型号Model HZS050-3Y
理论生产率Max theory Capacity (m3/h) 50
搅拌主机Mixer JS1000
储料仓容积Storage hopper capacity (m3) 4×8
骨料大粒径（卵石/碎石）Aggregate Max. Dia (pebble/crushed) 80/60mm
卸料高度Discharge height (m) 4
上料高度Charge height (m) 5.4
骨料计量精度Aggregate measuring accuracy (%) ±2
粉料计量精度Cement measuring accuracy (%) ±1
水计量精度Water measuring accuracy (%) ±1
外加剂计量精度Additive measuring accuracy (%) ±1
整机功率(不含水泥仓螺旋)Power of supply (kW) ( without cement silo and screw conveyor) 68
电压/频率Power voltage (V) /frequency (Hz) AC 380/50
整机重量(不含水泥仓螺旋)Total weight(t) about ( without cement silo and screw conveyor) 28.2

注：1. 产品按国家标准GB/T10171-2005及合同约定执行；
Note:1.Products are manufactured according to China state standard GB/T10171-2005.
2. .国家标准及合同中未约定部分按生产厂家产品参数执行；
2. All the parts which are not stipulated in the above or in the State standard are according to the manufacturer’s design.
3.由于技术改进原因，外购件型号、技术参数、产地可能有改变，但不低于现有功能
3 All the parts and specification may be changed without notification due to technical improvement , but not lower than the above configuration.
4、买方需自备以下设施：The buyer should provide the following facilities
（1）搅拌站的混凝土基础、到搅拌站配电柜的电源及搅拌站水源；
（1）the foundation of concrete batching plant, the power and water supplying point according to our foundation drawing.
（2）到搅拌站内的避雷系统；
（2）Lightning protection system
（3）根据国家标准进行的重量校准测量及校准的费用；
（3）Scales calibration is carried out according local standard on buyer’s expenses.
1.本设备建议采用三相五线制配电电源,单根电源线采用线径不小于95mm2 的铜线，电源变压器容量不小于200kVA，变压器距离搅拌楼不大于100米，否则需增粗线径。
The plant is suggested to adopt three phases five wires power supply , the single power line diameter is not less than 95mm2 of copper cable, and the capability of the transformer is not less than 200kVA. The distance between transformer and concrete batching plant should be less than 100 meters, otherwise the cable diameter should be increased.
6、以上配置按中国国内电源参数（电压380V/220V，频率50Hz）设置，如电源参数与此不符，需提前告知我公司。
The power source for all electrical components and motors is 380 V / 220 V, 50 Hz, If power source is different, please inform our company in advance.