山东生产配电箱箱体设备配电箱全自动生产线配电箱一次成型设备厂家

山东生产配电箱箱体设备 配电箱全自动生产线 配电箱一次成型设备厂家
生产的全自动一次成型生产线有：基业箱外框、配电箱、、消防箱、布线箱、弱电箱、动力柜、电门柜、保险箱等、以及各种电气控制箱的外壳一次成型设备，如配电箱外框自动成型设备可以直接成型成传统配电箱的框体，不在需要人工焊接四个边的形式，配电箱成型设备成型出来的产品只需要通过焊接等方式、焊接一边就可以了，直接合成框体。
配电箱生产设备主要参数
操作系统：触摸屏
控制方式：PLC
传动模式：齿轮箱
材料规格：Q235
生产速度：0-15m
切断方式：液压切断
电压参数：380V/415V，50Hz, 3相
电气控制：PLC
驱动电机：变频电机驱动
钢带厚度：0-6mm
钢带宽度：根据客户要求
占地空间： ××（长×宽×高）米
轧辊材质：GCr15 淬火HRC58°-62°
液压油型号：46#液压油
齿轮油型号：18#齿轮油
总电机功率：35.5kw
切断尺寸公差：≤ ±0.5mm（长≤3000mm）
切断模具材质： Cr12MoV
气源：0.5m?/Min；压力为0.7MPa

Professional production of fully automatic one-time forming production lines are: industrial box outer frame, distribution box, fire box, wiring box, weak electric box, power cabinet, door cabinet, safe box, etc., as well as various electrical control box outer shell one-time forming equipment, such as distribution box outer frame automatic forming equipment can be directly formed into the traditional distribution box box box frame, without the need for manual welding four sides of the form, matching. The products produced by the electric box forming equipment only need to be welded by welding and so on, and can be directly synthesized into the frame.

Main parameters of distribution box production equipment

Operating System: Touch Screen

Control mode: PLC

Transmission mode: gearbox

Material Specification: Q235

Production speed: 0-15m

Cut-off mode: hydraulic cut-off

Voltage parameters: 380V/415V, 50Hz, 3-phase

Electrical control: PLC

Driving motor: variable frequency motor drive

Strip thickness: 0-6mm

Width of Steel Band: According to Customer Requirements

Covering space: * m (length * width * height)

Roll Material: GCr15 Quenched HRC58 Degree-62 Degree

Hydraulic Oil Type: 46 # Hydraulic Oil

Gear Oil Type: 18 # Gear Oil

Total motor power: 35.5 kw

Cut-off dimension tolerance: <0.5mm (length <3000mm)

Cutting Die Material: Cr12MoV

Gas source: 0.5m?/Min; pressure: 0.7MPa