HID-浩海SX350射吸式清淤船，可拆分式挖泥船

射吸式抽沙船简介General Introduction
该船适用在封闭少浪的近海和内陆河流湖泊施工。
This cutter suction dredger is designed to operate in sheltered inshore waters.
是利用强水流使泥沙泛起再让泥沙泵吸走的原理。
To use strong water flow to shot sand up and suck away by pump.
安装行走的螺旋桨，移动工作方便。
Easily mobilize the ship by special propeller.
前边桥架扇形吸泥作业，达到要求的深度即可前进。
Anchor back of dredger to positioning and dredger ladder with cutter swingby sector fan-shaped.
参考ZC 标准设计，按照企业标准生产。
Build under enterprise standard with reference to ZC standard，China.
全船为焊接钢结构。底板10mm, 侧板和甲板为6mm.；四个压载水舱位于侧附体前后两端。
She is of all welded steel construction ,bottom plate 10 mm thickness and shell plating 6 mm thickness, 2 double bollards(fwd and aft) and 1 single bollard in the center on each side.
整船可拆装，可装入集装箱，适用于铁路和公路运输。
The whole dredger is dismountable in road transportable sections.
发动机和泵位于中间主机舱，两边的侧船体作为燃油舱，压载舱和储物仓。
The engines and dredge pump are located in the center pontoon, the 2 side pontoons serve as fuel bunkers, ballast tanks and store.
主机舱为水密舱。
Engine room and pump section are accessible by watertight hatches
为抽沙船驾驶员设计的宽敞明亮的操作室。全室周围向外观察无死角， 配备空调和可调节座椅，工作环境舒适。一名驾驶员操作所有监控仪表，灯光控制按钮和动作指令按钮。</a></a></a>