食品包装袋灭菌机蔬菜预煮机冷冻食品解冻机流水线厂家

袋装食品预煮机 叶菜漂烫蒸煮设备 蔬菜杀青设备厂家
食品包装袋灭菌机 蔬菜预煮机 冷冻食品解冻机流水线厂家
山东诸城佳品食品机械有限公司

Bagged food pre-boiling machine, vegetable-removing equipment, vegetable-removing equipment, factory-direct sale Shandong Zhuzhou is a good food machinery limited

整机采用SUS304不锈钢，温度、速度可根据工艺要求设定，该机运行平稳，不锈钢带强度高伸缩性小，不易变形，易保养，操作机维护方便等特点，与目前土法(杀菌池)相比劳动强度低，人力少，自控化程度高，温度可在98℃内自动调控，上下层水温差较小，产品质量容易控制，是蔬菜食品加工行业的理想设备。在食品、饮料、制药等行业中，要求对一些包装完毕的产品进行水浴灭菌。被包装好的产品放在可调速的不锈钢网带上，在传送带的作用下按序进入灭菌箱体内，经由“高温水为介质”杀菌后，再由传送带带入冷却箱体内均匀冷却，从而达到产品杀菌要求。

The machine adopts high quality SUS304 stainless steel, the temperature and speed can be set according to the process requirement, the machine runs smoothly, the stainless steel belt has the characteristics of high strength, low flexibility, not easy to deform, easy maintenance, convenient maintenance of the operator, etc. Compared with the current earth method (sterilizing pool), it has the advantages of low labor intensity, less manpower, high degree of automatic control, automatic control of temperature within 98 ℃, small temperature difference between upper and lower layers, and easy control of product quality. It is an ideal equipment for vegetable food processing industry. In the food, beverage, pharmaceutical and other industries, some packaged products are required to be sterilized by water bath. The packaged product is placed on a stainless steel mesh belt with adjustable speed.Under the action of the belt, it enters the sterilizing box in sequence, after sterilizing by "high temperature water as the medium", then the belt is brought into the cooling box to cool evenly, thus meeting the sterilization requirement of the product.

1)公司所售出的机器出厂之前全部进行试机，检测合格后才会发货给客户，确保客户收到机器后就能正常使用，完全避免客户的生产损失。
2)提供全套的安装，调试，维修，技术咨询等售前售后服务，以周到，细致，及时的速度解决客户在维修过程中所需要用到的零配件的支持。所有售出的产品一年之内免费维修。
3)服务宗旨：快速、果断、准确、周到、。
4)服务目标：以服务质量赢得客户的满意，以我们的诚心换取客户的欢心.
5)服务效率：保修期内或保修期外如设备出现故障，24小时内给予满意答复。
6)服务原则：产品保修期为十二个月，在保修期内供方将免费维修和更换属质量原因造成的零部件损坏，保修期外零部件的损坏，提供的配件只收成本费，由需方人为因素造成的设备损坏，供方维修或提供的配件均按计。

1) the company guarantees that all the machines sold will be tested before they leave the factory, and will not be shipped to the customers until they pass the test, so as to ensure that the machines can be used normally after the customers receive the machines, thus completely avoiding the production losses of the customers.

2) provide a full set of installation, commissioning, maintenance, technical advice and other pre-sale after-sales service, with thoughtful, meticulous and timely speed to solve customer needs in the maintenance process of spare parts support. All sold products are repaired free of charge within one year.

3) Service tenet: fast, decisive, accurate, thoughtful and thorough.

4) Service objective: to win customer satisfaction with service quality and to exchange customers with our sincerityThe heart of the household.

5) Service efficiency: if the equipment fails during or outside the warranty period, give a satisfactory reply within 24 hours.

6) Service principle: the warranty period of the product is 12 months. During the warranty period, the supplier will repair and replace the spare parts damage caused by quality reasons free of charge, the damage of spare parts outside the warranty period, and the cost of the spare parts provided will only be charged. Equipment damage caused by buyer's human factors, supplier maintenance or spare parts are at cost.