ABS韩国锦湖HU600SK邢台

ABS韩国锦湖HU600SK邢台 、▲‘TPU TI85AA、、▲‘PC EH-3104-FW、、▲‘PC AC2820-AD、、▲‘PPS BR-111BL、、▲‘PBT 3706、、▲‘TPU 121、、▲‘PC GP-1006FM、、LCP E345G40 RD 、、▲‘POM N2320006、、▲‘PP H1610、、▲‘PBT WF006H、、▲‘PA66 MT409AHS 、、→，PP HP748H、、▲‘PA6 KN133G43SIBL、、▲‘PP EPS30R、、▲‘PC 121、、▲‘ABS HU600SK、、▲‘POM F30-52G、、▲‘PA66 KN333HI5、、▲‘PP PH-780B、、▲‘PPS OCL4013、、▲‘PP HP5031、、▲‘PA66 RV00AES、、▲‘TPE XL7350-92、、▲‘PPS 1130L0、、▲‘PC AK3040、、▲‘POM LV450、、▲‘PP H150H 、、‖。PA6 RB845、、▲‘PP HF429、、LCP ZE55205 、、▲‘TPU 285、 SURLYN 8320、、▲‘PC RLL20CP、、▲‘PP 1042、、▲‘POM 107、、PC/、▲‘ABS 6200、、▲‘PP 5090T、、PC/、▲‘ABS 、PCA-F-7004 EM、、▲‘PA66 FE5313 BK、、▲‘TPU R198A、、▲‘PP RC5003、、▲‘PA6 M2500、▲‘ EV304、PA/MXD6 1022-0006、、▲‘PA6 B33LN01、、▲‘PC 8410-15、、PA12 X7166、MBS K175P、▲‘ 5272、、▲‘PA66 8067、、‖。POM 900P、、▲‘PC 2200R、、▲‘PBT X4398、▲‘PPO GFN1、、▲‘PA66 AKV50、、PMMA 99710、、PC/、▲‘ABS HAC8265FR、▲‘ V28280、、▲‘PP 7823M 、PA11 HF-1006、、▲‘ABS TP-801、、▲‘PP 3342L、、▲‘PPS 1140L6、、▲‘PBT X4877、、▲‘PP 2120G 、、▲‘PP H703-22、、→，PA12 L2122、


ABS韩国锦湖HU600SK邢台Optical properties of PMMA
1, visible light: high transmittance of visible light. PMMA is the best polymer transparent material at present, and its visible light transmittance is 92%, which is [1] higher than that of glass.
1. ultraviolet light: quartz can be completely ultraviolet light, but the price is high, ordinary glass can only pass through 0.6% ultraviolet ray, but PMMA can pass through 73%. PMMA can't filter out ultraviolet (UV). Ultraviolet light penetrates PMMA, and part of the manufacturer [2] is coated on the surface of the PMMA to increase the effect and properties of the UV light. On the other hand, PMMA has better stability than polycarbonate in the condition of ultraviolet light irradiation.
2. infrared: PMMA allows infrared rays less than 2800nm wavelengths to pass through. Longer wavelengths of IR, less than 25000nm, are basically blocked. There is a special colored PMMA that allows a specific wavelength of IR to pass through and block visible light, (used for remote control or heat, etc.).

The POM enhanced POM
The main reinforcement materials are glass fiber, glass ball or carbon fiber, and glass fiber is most commonly used. The mechanical properties of the reinforced glass can be increased by 2~3 times and the hot deformation temperature is increased by 50 degrees or more.
The high oil POM
Adding graphite, F4, molybdenum disulfide, lubricating oil and low molecular weight PE to POM can improve its lubrication performance. For example, adding 5 copies of F4 in POM can reduce the friction factor by 60%, and increase the wear resistance by 1~2 times. In addition, the addition of liquid lubricating oil in POM can greatly improve the wear resistance and the limit of PV. In order to improve the dispersing effect of oil, the oil absorption carrier, such as carbon black, barium hydroxide, and ethylene propylene rubber, should be added. The friction of adding 5% oil POM is increased by 72%, and the limit PV can reach 3.9MPa m/s (pure POM is 0.213MPa m/s), which is 3~20 times that of other engineering plastics.


PPO B has good electrical properties in a wide range of temperature and frequency. It has no hydrolysis and shrinkage, and has no self extinguishment. It is resistant to inorganic acid, alkali, aromatic hydrocarbon, halogenated hydrocarbon and oil. It is prone to swelling or stress cracking. C, it has the advantages of large rigidity, high heat resistance, refractory, high strength and so on. D and polyether have the advantages of wear-resistant, non-toxic, and resistant to pollution. Dielectric constant and dielectric loss of E and PPO plastic materials are among the smallest varieties in engineering plastics. They are hardly affected by temperature and humidity. They can be used in low, medium and high frequency electric fields. The load deformation temperature of F and PPO can reach more than 190 degrees C, and the embrittlement temperature is -170 C. G, its main shortcomings are poor melt fluidity and difficult processing.。