不锈钢螺丝清洗螺丝十字槽清洗剂

螺丝十字槽清洗剂 如有需要请联系，公司免费试样
产品简介
十字槽清洗剂适用所有不锈钢、不锈铁及钢铁等材料的工件，在不腐蚀工件和不改变表面的光泽度的情况下，能快速的去除工件十字槽内的严重氧化物、炭灰及脏污等。

本品采用环保碱性盐类为主剂、添加缓蚀剂及少量表面活性剂化合而成，不含酸蚀成份，有氧化性，、无味。符合当今环保RoHS标准，通过本品清洗，可有效清洗过程中不改变工件尺寸，提高工件表面的光泽度。
特性与优点
· 能清除螺丝钉类的十字槽内的污垢。
· 不改变工件尺寸，可提高光泽度。
· 本工艺具有性能稳定、表面处理一致的特点。
· 本品广泛适用于不锈钢、不锈铁及钢铁材料的十字槽的清洗，通用性强。

应用范围
· 广泛应用于各类不锈钢、不锈铁及钢铁材料工件的十字槽的清洗处理，特别是对于各类不锈钢螺丝钉工件的十字槽内顽固的严重油污、炭灰及氧化皮等有清除作用。
Cross trough cleaning agent

Cross groove cleaning agent is suitable for all stainless steel, stainless iron and steel workpieces, without corroding the workpiece and changing the glossiness of the surface, it can remove the serious oxide in the cross groove of the workpiece quickly and thoroughly. Carbon ash and dirt, etc.

This product uses environmental protection alkaline salt main agent, the addition high quality corrosion inhibitor and a small amount of surface active agent combination, does not contain the acid corrosion ingredient, has the oxidation, is not poisonous, tasteless. According to the current environmental protection RoHS standard, through this product cleaning, can effectively guarantee the cleaning process does not change the workpiece size, enhances the workpiece surface glossiness.

Characteristics and advantages

Can thoroughly remove the dirt in the screw cross groove.

Do not change the size of the workpiece, can improve the gloss.

The process has the characteristics of stable performance and consistent surface treatment.

This product is widely used in stainless steel, stainless steel and iron and steel cross-groove cleaning, versatile. Scope of application

Widely used in all kinds of stainless steel, stainless iron and steel workpiece cross cleaning treatment, especially for all kinds of stainless steel screw workpiece cross recalcitrant serious oil pollution, carbon ash and oxide skin, and so on have a special effect.