机器人电缆，无卤，超柔性ANRBT900D

机器人电缆，无卤，超柔性ANRBT900D


应用领域
ANRBT900D,超柔性,设计用于机器人系统，自动装卸设备并且用于无特殊移动的机械装置。其可以用于室内和室外。特殊的电缆构造和零部件使该电缆能够在很长使用寿命内达到高弯曲半径和扭转周期要求。其可用于有侵蚀性矿物油渗漏的区域以及需要电缆承受高机械应力的场合。PUR 外护套抗撕裂和耐磨损。
application
ANRBT900D is designed for robotic systems, automatic handling equipment and for machineries with no special movement schedule. It can be used in- and outdoors. A special cable construction and high quality components allow the cable to meet high bending radius and torsion cycles over a long service life. It can be used in areas where agressive and mineral oils occur and where the cable is exposed to high mechanical stress. The PUR outer sheath is cut and notch resistant and nonabrasive.

构造
超细裸铜丝多股精绞成束，PE芯线绝缘，芯线颜色按照DIN 47100标准。芯线大于0,5 mm² 为黑色带连续白色数字编号。3芯及以上包含绿黄保护接地导线。芯线绞合成束并且铺设成，特殊芯线包裹在每层外。PUR外护套，抗紫外线，不黏连，阻燃和自熄(符合 DIN EN 60332-1-2 VDE 0482 332-1-2:2005-06部分标准),抗水解和微生物。外护套颜色为黑色(RAL 9005)。
construction
Superfine strands of bare copper wires, polyester (TPE) core insulation, core colours acc. to DIN 47100. Cores from 0,5 mm² are black with consecutive white numbering. 3 cores and more with greenyellow protective conductor in the outer layer. Cores twisted in bundels and laid in layer, special wrapping over each layer. PUR-based outer sheath, UV-resistant, low-adhesive,flame retardant and self-extinguishing (acc. DIN EN 60332-1-2 VDE 0482 part 332-1-2:2005-06), resistant to hydrolysis and microbes. Colour black (RAL 9005).

技术数据 / technical data
额定电压 / rated voltage:

DIN VDE/IEC

UL/CSA


大于 / up to 0,34mm² 300 V
小于 /from 0,50mm² 300/500V
小于 /up to 0,34mm² 300 V
小于 /up to 1,5mm² 600 V
小于 /up to 2,5mm² 1.000 V

测试电压 / test voltage:


小于 / up to 0,34mm² 1.500 V
小于 / up to 0,50mm² 3.000 V
导体绞合方式 / conductor stranding:


超细纯铜丝绞合 / bare fine copper
strands,符合 / acc. to DIN VDE 0295,
6 类标准 / class 6

绝缘阻抗 / insulation resistance:
小 100 MOhm x km

温度范围 / temperature range:



固定安装 / fixed installation:
-50° C 至 /to +80° C
移动 / flexible application:
-30° C 至 /to +80° C

弯曲半径 / bending radius:



固定安装 / fixed installation:
7,5 x d 外径 -Ø / outer-Ø
移动应用 / flexible application:
10 x d 外径 -Ø / outer-Ø

扭角 / torsion angle:
大 ± 360° /m

符合标准 / approvals:
符合 / acc. to DIN VDE 0250, 0285
UL: 大于 / from 0,25mm²: Style 20940
CSA: AWM I A/B, II A/B FT1