二类超晶格T2SL0.9~2.5μm短波近红外成像相机

・It is a broadband near-infrared camera equipped with InGaAs/GaAsSbTypeII super lattice
device FPA.
・Compact camera head while cooling an element at -75 degrees Celsius by the Peltier element
of the sensor internal organs and original water-cooled mechanism.
・By the camera link output, It copes with outside trigger photography and is most suitable for
industrial inspection.
Camera specifications
Sensitivity wavelength
Main body external representation
Items specifications
Sensor TypeⅡ super lattice crystal array sensor
Pixel number 320×256pixel
Pixel pitch 30μm/pixel (Light receiving aspect size : 9.6mm×7.68mm)
Sensitivity wavelength 1.0～2.35μｍ
Frame rate / ADC Maximum 350frame/sec 16bit
System structure Camera head (Imaging part) + Control unit (Water-cooled control・Image output)
Control interface RS-232C（CameraLink through）
Power (Control unit input) AC100V Consumption electricity : 55W (Room temperature28℃) Maximum75W
Operational temperature / preservation
temperature
-10～+50℃（No dew condensation）/-25～+60℃（No dew condensation）
Temperature control function The TEC deployment by Peltier cooler with a built-in sensor (Cooling outside as for the exhaust heat by
water cooling)
Lens mount Standard：C mount M mount
Camera head Size W78㎜×H60㎜×D78㎜（Without lens）
Image output interface CameraLink Base Configuration × 1 Connector : SDR
External trigger operation Async trigger imaging is possible (Trigger input through CameraLink CC1)
Control unit size W300㎜×150㎜×D250㎜