30010国标橡胶止水带报价

实际应用中主要使用在结构物的引发缝、完全收缩缝、不完全收缩缝等部位。具有与混凝土锚固紧密、止水密封及弹性拉伸变形等特点，止水带系采用弹性材料，并掺加多种辅加助剂，经混炼、硫化而制成。
In practical application, it is mainly used in the initiation joints, complete contraction joints, incomplete contraction joints and other parts of the structure. It has the characteristics of close anchoring with concrete, water sealing and elastic tensile deformation. The water stop belt is made of elastic material and mixed with a variety of auxiliary additives, and is made by mixing and vulcanizing.
遇水膨胀橡胶止水带具有普通橡胶止水带的性能外，其主要特点是内防水线采用了具有遇水膨胀工程的特殊橡胶制成。这样在膨胀橡胶遇水膨胀后增强了止水带和构筑物的紧密度，使防水、止水效好。
The water swelling rubber water stop strip has the performance of the ordinary rubber water stop belt, and its main feature is that the inner water resisting waterline is made of special rubber with water expansion engineering. Thus, when the expansion rubber meets the water expansion, the tightness of the water stop belt and the structure is enhanced, and the waterproof and water stopping effect is good.
遇水膨胀橡胶止水带膨胀防水线部分胶料执行GB18173.3-2002标准。
Water swelling rubber sealing strip expansion anti water line part of rubber to implement GB18173.3-2002 standard.
其余部分橡胶与普通橡胶止水带物理机械性能相同，执行GB18173.2-2000标准。
The rest of the rubber and ordinary rubber waterproof belt physical and mechanical performance is the same, the implementation of GB18173.2-2000 standard.
二、代号表示方法及适用范围止水带胶胶种：（NR)表示天然胶;（CR)表示氯丁胶。产品代号：HJ表示我公司生产的。HJ（NR）型表示采用我公司生产的橡胶止水带，材料为天然橡胶。适用于淡水防渗工程，适用温度-40～60℃。HJ（CR）型表示采用我公司生产的橡胶止水带，材料为氯丁橡胶。适用于含酸碱等污水防渗工程，适用温度－35～60℃。HJ（NBR）型表示采用我公司生产的橡胶止水带。适用于含石油基油类的污水防渗工程，适用温度-35～60℃。
Two, code representation and scope of application: tape (NR) means natural glue; (CR) means chloroprene rubber. Product Code: HJ means the product produced by our company. HJ (NR) represents the rubber water stop produced by our company, and the material is natural rubber. It is suitable for fresh water seepage prevention project, applicable temperature -40 ~ 60 degrees centigrade. HJ (CR) represents the rubber water stop produced by our company and the material is chloroprene rubber. Suitable for acid sewage seepage control project, suitable temperature to 60 DEG C - 35. HJ (NBR) represents the rubber water stop produced by our company. It is suitable for sewage impervious engineering with petroleum base oil, applicable temperature -35 ~ 60 degrees centigrade.
三、橡胶止水带技术标准
Three. Technical standard of rubber water stop belt
1．我公司生产的橡胶止水带是采用国家标准GB18173.2-2000标准组织生产的，尺寸公差一律按国家标准执行，如用户有特殊要求，可按用户要求制造。
1. the rubber water stop produced by our company is produced by the national standard GB18173.2-2000 standard. The size tolerance is carried out according to the national standard. If the user has special requirements, it can be manufactured according to the requirements of the user.
2、我公司可按用户要求生产各种形状、尺寸的橡胶止水带，另外还可为不同工程、不同部位的需要备有十字型、丁字型、斜度型和内外转角型产品，可适用于任何设计要求。
2, my company can according to the production of various shapes and sizes of rubber sealing requirements, need also for different parts of engineering, preparation of a cross shaped, inclination angle and internal and external products, can be applied to any design requirements.
3、橡胶止水带在运输时，应要避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所保持-10-+30，相对湿度40%-80%。
3, the rubber sealing strip during transportation, should avoid direct sunlight, do not contact with heat, oil and harmful solvent. The finished product should be straight and flat, without heavy pressure. Storage place kept -10-+30, relative humidity 40%-80%.