现货台湾金和原装车床

项目 CH-400 CH-430 CH-530
容量 床面上旋径Swing over bed 406mm 432mm 532mm
鞍面上旋径Swing over carriage 238mm 268mm 368mm
凹口上旋径Swing over gap 580mm 610mm 710mm
从面板止算起凹口长度 Width of gap in front of face plate 150mm
两心间距离Distance between centers(A1-6,A2-6) 767,1067,1667mm
床面宽度Width of bed 300mm
车刀台行程 145mm
横身滑座行程Stroke of cross slide 265mm
主轴箱 主轴孔径Spindle bore 51mm 58mm(78mm)″
主轴孔及中心针斜度Taper or spindle bore §center MT6×MT4
主轴鼻端Spindle nose A1-6,D1-6(A2-6) ″
主轴速度变换数Number of spindle speeds 8 12
主轴速度Spindle speed(60HZ) 7125,1800rpm ￠58mm:35,52,75,11rpm
￠78mm:29,43,62,99rpm
螺纹和进给 进给变换数Number of feeds 36
纵向进给范围Range of longitudinal feeds 公制 metric 0.07-0.5mm/rev 0.037-1.04mm/rev(P=6mm)
0.035-0.98mm/rev(4TPI)
横向进给范围Range of cross feeds 1/2纵向进给 Half of longitudinal feeds
导螺杆直径Leadscrew diameter 35mm
导螺杆螺距Leadscrew pitch 4TPI,P=6mm
英制螺纹范围Range of inch pitches 4-42TPI(36 Kinds) 2-72TPI(44 Kinds)
公制螺纹范围Range of metric pitches 0.4-7.0mm(36 Kinds) 0.2-14mm(39 Kinds)
尾座 Tailstock 心轴移动量 Quill stroke 170mm

心轴直径 Quill diameter 60mm
心轴斜度 Quill taper MT#4
马达 Motor 主轴马达（30分）Main motor(30 min.) 5HP(7.5HP) ″
切削液马达Coolant pump motor 1/8HP
机械尺寸Machine dimension 机械高度Height 1400mm
佔地面积Floor space 20×1000mm
机械重量 Weight 1450,1550kgs 800kgs 16kgs