江苏省苏州市昆山市大鑫华激光紫外激光打标机

紫外线激光打标机

属于冷激光加工，波长355nm，主要适用于热敏感材料、脆性材料或者其他的一些特殊加工要求，目前价格较贵。

原理：
紫外激光加工时的反应是通过激光化学消融作用实现的，即依靠激光能量打断原子与分子间的键合，使其成为小分子汽化、蒸发掉.

优点及适用范围：
1、 紫外激光波长短，光束质量好，聚焦光斑更小。
2、 紫外激光加工属于冷加工，热影响小。
3、 功率脉宽输出稳定，特别适用超精细微加工领域。

行业应用：
1、 适用于蓝宝石、石英、陶瓷、玻璃等超硬材料的精细打标。
2、 适合于手机、平板行业相关配件打标，如手机盖、触摸屏、数据线、电源、连接器等
3、 广泛应用于食品、药品、化妆品、电线等高分子材料的包装瓶表面打标，打微孔。


UV Laser Marking Machine

UV laser marking machine belongs cold laser processing, wavelength 355nm, mainly for heat-sensitive materials, brittle materials or some other special processing requirements materials. Now the current price is more expensive.

Principle
The way of UV laser processing is according laser chemical ablation to achieved, that is, relying on laser energy to interrupt the bonding between atoms and molecules, making it become a small molecule vaporization and evaporation finished.

Application Range
1. UV laser wavelength is short, good beam quality, focusing spot more smaller.
2. UV laser processing is cold processing, heat effect is small.
3. Pulse width output power stability, especially suitable for ultra-fine micro-processing areas.

Industry Application
1. Suitable for sapphire, quartz, ceramics, glass and other superhard materials, exquisite marking.
2. Suitable for mobile phones, ipad industry related accessories marking, such as mobile phone cover, touch screen, data cable, power supply, connectors, etc.
3. Widely used in food, medicine, cosmetics, wire and other polymer materials, the surface of the bottle marking, bore microporous.
Technical Parameters

Technical Specifications
Type DXH-UV3 / UV5 / UV10
Average output power 3W / 5W / 10W
Laser Wavelength 355nm
Laser Frequency 10-150KHZ
Standard Engrave Range 100*100mm / 150*150mm (Optional)
Engrave Line Speed ≤7000mm/s
Min Line Width 0.01mm
Min Character 0.2mm
Repeated Accuracy ±0.002mm
Electric Requirement 220V/60HZ
Total Power 500W