脚踏板成型生产线制造商

Chinese fir rod or bamboo scaffolding With hemp rope, bound and Chinese fir rod or wire with colligation bamboo pole bamboo grew into the shelf, each layer of shelf with wood or bamboo raft, to construction personnel to walk.
Bridge scaffold Made of Angle steel and round steel welding section 4 m of the lattice type steel column and combined steel truss.Its advantage is truss lifting speed, and can stay at the proper height for easy operation, suitable for multistory buildings.Bridge scaffold reduced amount of steel used for about 5 kg per square metre.
Fastener steel tube scaffold Composed of 48 mm diameter steel pipe and fastener assembly.Fasteners in malleable cast iron or of high qualified steel plate forming technology.Length of steel tube with 5 meters advisable.Fastener steel pipe frame has the advantage of strong adaptability, can be used for all types of buildings and derrick and feeding platform, also can be used as template support.Fastener steel pipe frame or steel used quantity of about 15 kg per square metre.
Masonry platform For laying in the scaffold.By 4 ~ 6 root steel tube column, the column with steel welded truss connections between, on scaffolding.Masonry platform with cranes move as a whole.
Suspension scaffold Used for high-rise building exterior wall decoration of shelf.The pick on the roof beam, hanging basket, wire rope and hanging basket, etc.Two kinds of suspension scaffold fabricated and fixed.Prefabricated suspension scaffold is usually integrates 48 mm diameter steel pipe with fastener need length (about 9 ~ 12 m.).Fixed suspension scaffold is made from thin wall steel or aluminum alloy hanging basket frame, 2.5 ~ 3.5 meters long.Suspension scaffold available manual gourd or chain control.
Vertical mast lifting equipment Mainly used for building materials and semi-finished products of vertical transportation.Set in along the outside of the building and its location should be determined according to the construction site plan of construction organization design, the number according to the need to transport the amount of materials and products.Most of derrick lattice.Bar has a vertical pole, flat and brace.According to the requirements of use, can be designed into different forms and different hole size of single span or porous derrick.In addition to the structure itself, should also be equipped with lifting cage, hoist, wire rope, pulleys and other power transmission system and control switch, stop and contact signal control system.
Gantry crane frame By two root on the top of the composite steel column and the erection of steel beams.Columns usually consists of three 48 mm diameter steel pipe or Angle steel and steel