LED应急电源10-30W全功率灯管智能应急驱动

LED应急电源10-30W全功率灯管智能应急驱动
保护特性
Protective properties

过压保护：＞120V
-Over voltage protection：＞120V
保护方式：出现异常关闭输出，异常移除后重启恢复
-Protection mode: close the output and restart the recovery after the exception is removed
空载保护
-No-load protection
保护方式：无负载时立即切断输出，接上负载恢复正常保护
Protection mode: When there is no load, immediately cut off the output, connect the load to restore normal protection
电池过放保护
-Battery overdischarge protection
保护方式：当电池电压放至9V状态时，电池将自动截止放电，通电后将自动充电，直至充满
Protection mode: When the battery voltage is put to 9V state, the battery will automatically cut off the discharge, after power on, it will automatically charge until it is fully charged
电池过充保护
-Battery overcharge protection
电池充至12.6V时将自动截止充电
When the battery is charged to12.6V, it will automatically stop charging
安全性能
Security features
抗震性：-抗振性：10〜500Hz，2G 10min./1周期，60分钟长，每个轴
-Vibration resistance：10 ~ 500Hz, 2G 10min./1 cycle, 60 min long, each axis
耐压性：输入与输出之间：1.5KVAC 输入与接地：1.5KVAC 输出与接地：0.5KVAC
-Pressure resistance：Between input and output: 1.5KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC
绝缘电阻：输入与输出之间：输入与接地之间-输出与接地之间：100M Ohms / 500VDC
-Insulation resistance：Between input and output: input and ground: output and ground: 100M Ohms/500VDC
纹波噪声：400mvp-p
-Ripple noise：400mvp-p
冲击电流：冷启动10A230VAC
-Impact of current：Cold start 10A230VAC
漏电流：＜3.5Ma / 240VAC
-Leakage current：＜3.5Ma/240VAC