代理13玻纤PA66NILAMIDA3J10GF13耐低温冲击
-
¥37.90
代理13%玻纤PA66 NILAMID A3 J10 GF13耐低温冲击
Density (23°C) | 1.20 | g/cm³ | ISO 1183 |
Molding Shrinkage | ISO 294-4 | ||
Across Flow : 23°C | 0.80 | % | |
Flow : 23°C | 0.50 | % | |
Water Absorption | ISO 62 | ||
24 hr, 23°C | 1.0 | % | |
Saturation, 23°C | 6.0 | % |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus (23°C) | 3500 | MPa | ISO 527-2 |
Tensile Stress (Yield, 23°C) | 90.0 | MPa | ISO 527-2 |
Tensile Strain (Break, 23°C) | 4.0 | % | ISO 527-2 |
Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength (23°C) | 13 | kJ/m² | ISO 179/1eA |
Notched Izod Impact Strength (23°C) | 12 | kJ/m² | ISO 180/A |
Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature (1.8 MPa, Unannealed) | 238 | °C | ISO 75-2/A |
Continuous Use Temperature 3 | 95.0 | °C | IEC 60216 |
Ball Pressure Test | IEC 60695-10-2 | ||
125°C | Pass | ||
165°C | Pass |
Electrical | Nominal Value | Unit | Test Method |
Surface Resistivity 4 | 1.0E+12 | ohms | IEC 60093 |
Volume Resistivity (23°C) | 1.0E+15 | ohms·cm | IEC 60093 |
Comparative Tracking Index (3.20 mm, Solution A) | 500 | V | IEC 60112 |
防静电PA,导电PA,加纤防火PA,防火PA,抗紫外线耐候PA,高温挤出级PA。
导电尼龙66:具有良好的耐磨性、耐热性、耐油性及耐化学药品性,还大大降低了原材料的吸水率和收缩率,具有优良的尺寸稳定性及的机械强度。能满足静电消散和静电放电(ESD)防护的要求。这些特殊改性材料经特殊配制,适用于从100到1012欧姆/平方(ohms/sq)的表面电阻范围,可用于注塑及挤出等成型。有很多金属和涂装的优点:零件重量较轻,较易处理,运输成本较低。它们的装配简便,制造成本较低,并且较不会受到撞凹,割损和刮伤。为了标识或美观目的,一些材料可被预先染色,避免费时且昂贵的两次着色加工。
代理13%玻纤PA66 NILAMID A3 J10 GF13耐低温冲击